Our Facilities

July 22, 2020

Pencil Hardness Tester

Description:     The Pencil Tester is an effective method to test coatings for their hardness and resistance to scratches and wear. The test method allows the use of pencils which have a known hardness grade to be moved over the...

July 17, 2020

DFT Meter

Description:   A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is the most critical measurement in the coatings industry because of its impact on...

July 17, 2020

Conductivity Meter

Description:   A conductivity meter measures the amount of electrical current or conductance in a solution. Conductivity is useful in determining the overall health of a natural water body. It is also a way to measure changes in wastewater...

July 17, 2020

Adhesion Tester

Description : Paint adhesion testing is often used to determine if the paint or coating will adhere properly to the substrates to which they are applied. There are several different tests to measure the resistance of paints...

July 17, 2020

PH Meter

Description:   A pH meter is an instrument used to measure acidity or alkalinity of a solution – also know as pH. pH is the unit of measure that describes the degree of acidity or alkalinity. It is measured...

July 17, 2020

Viscosity Cup

Description:   The  viscosity cup is a simple gravity device that permits the timed flow of a known volume of liquid passing through an orifice located at the bottom. Under ideal conditions, this rate of flow would be proportional to the kinematic viscosity (expressed in stokes...

April 13, 2020

DM water plant

Description:     Demineralization ( DM ) Water Treatment Plants. Demineralization is the process of removing mineral salts from Water by using the ion exchange process.  

April 13, 2020

RO Plant

Description: A reverse osmosis plant is a manufacturing plant where the process of reverse osmosis takes place. Reverse osmosis is a common process to purify or desalinate contaminated water by forcing water through a membrane.[1] Water produced by reverse osmosis may...

April 13, 2020

Micro Hardness tester

DESCRIPTION :   Microhardness Testing is a method of determining a material’s hardness or resistance to penetration when test samples are very small or thin, or when small regions in a composite sample or plating are to...

April 13, 2020

Hot air oven

Description: Hot air ovens are electrical devices which use dry heat to sterilize. They were originally developed by Pasteur.[1] Generally, they use a thermostat to control the temperature. Their double walled insulation keeps the heat in and conserves energy, the inner layer being a...